EU Declaration of Conformity for NEOUZA Coffee Accessories

EU DECLARATION OF CONFORMITY

CE Document No. [GZHL260300786101CW-1] | Issued: 12/03/2026 | Valid: Long-term

1. Manufacturer Information

Brand: NEOUZA
Company: XINZE (DONGGUAN) WANGLUO KEJI YOUXIANGONGSI
Contact: shop@neouza.com

2. EU Authorized Representative

Company: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA
Address: CASTELLANA 91 41, 28046 Madrid, Spain

3. Product Description

Category: Coffee Utensils & Accessories
Scope: Stainless steel parts (food contact), Wooden products (non-food contact)
Items: Tamper, distributor, needle distributor, portafilter, dosing ring, basket, milk frothing pitcher, wooden handles, etc.
Materials: Food-grade SUS304 stainless steel, Natural wood

4. Test Reports & Compliance

Testing Laboratory: SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch

• Report No.: GZHL260300786101CW-1
• Sample Date: March 02, 2026 | Test Completion: March 12, 2026
• SGS Ref: CAN26-0044421 (SVHC), CANHL260300786101CW (stainless steel), CANHL26004442201 (formaldehyde)

Test Items Conducted:

• REACH SVHC screening (253 substances + 1 potential SVHC)
• US FDA GRAS total chromium content
• FDA 21CFR 175.300 total extractives
• EU 1935/2004 extractable heavy metals (3 migration tests)
• Sensorial examination (odour & taste per DIN 10955:2024)
• Formaldehyde release (EN 717-3:1996, MDL=10mg/kg)

5. EU Regulations Complied

The products fully comply with the following EU regulations:

1. Regulation (EC) No 1935/2004 — Materials and articles intended to come into contact with foodstuffs
2. Regulation (EC) No 1907/2006 — REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals)
3. EN 717-3:1996 — Wood-based panels: Determination of formaldehyde release (Gas analysis method)
4. EDQM Technical Guide on Metals and alloys used in food contact materials (2nd ed., 2024)
5. DIN 10955:2024 — Sensorial examination for food contact materials

6. Manufacturer Compliance Statement

We, XINZE (DONGGUAN) WANGLUO KEJI YOUXIANGONGSI, as the manufacturer and brand owner of NEOUZA products, solemnly declare:

1. All products covered by this declaration are produced with raw materials of the same grade, specification and quality as the SGS-tested samples.
2. Test results are consistent with SGS Report No. GZHL260300786101CW-1:
   • Stainless steel parts: Meet US FDA GRAS (Cr ≥16%), FDA 21CFR 175.300 (total extractives ND in all simulants), EU 1935/2004 + EDQM 2024 (extractable heavy metals ND).
   • Wooden products: Pass REACH SVHC screening (all 253+1 SVHCs ≤0.1% w/w, ND), formaldehyde release ND per EN 717-3:1996.
3. Production strictly abides by relevant EU regulations and quality management systems.
4. We take full legal responsibility for product compliance. For any quality issues caused by unauthorized raw material replacement or process modification without notice and retesting, we will assume all corresponding legal responsibilities.

Place of Issuance: Dongguan, Guangdong, P.R. China
Authorized Signatory: Guangyong Xu
Position: General Manager
Date: 12/03/2026

Notes:
• Content in [brackets] should be filled per actual company data
• Chapter 2 may be deleted if no EU authorized representative
• This declaration must be used together with the original SGS test report